Pilling, Holes & Durability

How to Fix a Hole in a Sweater: Step-by-Step Guide

Mend holes in sweaters the right way—see proven repair steps, what thread to use, mistakes to avoid, and how repairs hold up to washing and daily wear.

In this guide

If you want to know how to fix a hole in a sweater, the best method is to hand-stitch it with matching yarn or thread using a darning or invisible seam technique. This stops the hole from growing and restores strength, helping your sweater last through future washes and wear.

To repair a sweater hole well, trim away loose fibers, sew with snug, even stitches, and match the yarn type and color as closely as possible for a nearly invisible and durable result.

Key takeaways

  • Hand-sewing with matching yarn or thread is the most secure way to fix sweater holes.
  • Darning or mattress stitch repairs reinforce the weak spot and prevent further tearing.
  • Prompt repairs stop holes from enlarging—lab-tested fleece knits fail at weak points if left unattended.
  • Repairs that use the right tension and thread last longer through washing stress and wear.
  • Fleece sweater knits show a median bursting strength of 241 kPa, but 13% of tested samples failed: good repairs matter for lasting use.
  • Repairs survive best when sweaters are washed gently and line dried, not tumble dried.

Why do sweaters get holes?

Holes in sweaters develop most often because of snagging, abrasion (underarms, elbows, seams), or weak points developing where the knit is thinned out. Moth holes do occur but are much less common than mechanical damage in cotton or cotton-blend sweaters. Normal washing and stretching can cause small snags to turn into holes over time.

In lab tests on common sweater fleece fabrics, the median bursting (tear) strength was 241 kPa, but 13% of samples failed set strength standards, confirming that stress points are prone to breakage and holes if not repaired early.

Sweater fleece: bursting strength in real samples

Measured result
Test
Bursting (tear) resistance
Method
Lab test (circular burst)
Sample
23 reports, Jan–Sep 2026
Conditions
ASTM D3786 burst test
Result
Median 241 kPa; 3 of 23 failed

Holes develop mostly at worn or stretched areas.

How this was measured: how we test.

How to fix a hole in a sweater (step-by-step)

How to fix a hole in a sweater

  1. Trim loose threads and fuzz from around the hole.
  2. Thread a needle with yarn or polyester thread matching your sweater’s color and thickness.
  3. Turn the sweater inside out.
  4. Sew across the hole with small, even stitches, picking up 1–2 loops beyond the weak area.
  5. Tie off securely, and weave the ends into surrounding stitches.
  6. Check the right side to make sure the repair is flat and blends in.

Darning is best for holes in the main body, and mattress stitch works well at seams or side holes. For bigger holes (over 1 inch), sew in a matching knit patch for strength.

How to choose thread or yarn for sweater repair

For most sweaters (cotton, cotton-poly, fleeces), use polyester thread for its strength and wash resistance. For wool sweaters, use a closely matched wool yarn which moves naturally with the fabric. A good match in thickness and color will make the repair much less noticeable and helps the patch take wear the same as the rest of the sweater.

If color is not exact, picking a lighter shade is less visible. When possible, unravel a bit from a seam to use the original yarn.

Washing tips for repaired sweaters

Machine wash at 30 °C (86 °F) or belowCool water keeps the dye and fiber stable. Hotter water can shrink the fabric, loosen dye or weaken elastane.
Non-chlorine (oxygen) bleach onlyChlorine bleach would strip the dye or yellow the fiber; oxygen bleach is gentler.
Line dryHang to dry; it keeps size and saves the fiber from dryer heat.
Iron on medium, max 150 °C (300 °F)Medium heat suits polyester, wool, silk, viscose and modal. Use a pressing cloth on dark colors to avoid shine.
Line drying and gentle wash settings keep repairs strong. Always check your garment label.

Why do holes in sweaters get worse if left unfixed?

Small holes tend to grow quickly because knit fabrics unravel or stretch where the structure is broken. Results from production and lab tests show even a single weak spot can compromise bursting strength—three out of 23 fleece samples failed under tear testing. Once opened, the edges of the hole can pull apart in wearing and especially in machine washes, resulting in a much larger damaged area.

How holes form and spread in sweaters

Problem

Hole in sweater becomes bigger

Why it happens

  • Snag damages yarn
  • Abrasion weakens fabric
  • Washing stretches the area

What fixes it

  • Reinforce with strong stitches
  • Sew before washing
  • Trim fuzz to prevent additional snags

How long do repairs last through washing and wear?

Durability depends on repair quality, fabric type, and washing method. Sweaters made from fleece knits shrink around 5% in length and grow 2% in width after just one wash and tumble dry (in 1,919 production lots). Repairs sewn with the right tension move with the fabric, while tight or loose stitches may break or pucker with wear and shrinkage. Strong, even repairs are likely to last for many washing cycles if you wash gently.

Fleece fabrics: shrinkage after one wash + tumble dry

Measured result
Test
Dimensional change after washing + tumble drying
Method
Production wash test
Sample
1,919 fleece lots
Conditions
1 wash, tumble dry
Result
Median −5% length, +2% width

Line drying and careful sewing reduce repair puckering.

How this was measured: how we test.

[h2]What mistakes make sweater repairs fail?[/h2]

Avoid these issues:

  • Thread or yarn too thin or too thick—does not reinforce well or stands out visually.
  • Pulled stitches too tight—lead to stiff, puckered areas that deform in washing.
  • Loose securing knots or tails—can come undone with movement and laundering.
  • Skipping fuzz removal—leftover pills and broken fibers can snag and enlarge the hole.
  • Not extending repair beyond the hole—edges may reopen if you don’t pick up sound fabric around the weak spot.

What to do if the repair comes undone or looks bad

If your repair pops loose or the gap stretches out, carefully remove only the repair stitches with a seam ripper or scissors. Clean the hole’s edge (remove fuzz), retighten your thread choice, and redo the mending with shorter, snug stitches. For large or jagged holes, cover with a patch (ideally from similarly knit fabric) and secure all edges with blanket or whip stitch for best hold.

How to care for a repaired sweater so the fix lasts

The best way to wash a repaired sweater is by hand or on a gentle cycle at cold to 30 °C (86 °F), then drying flat or on a line. Tumble drying increases stress and adds to shrinkage—the median shrinkage of fleece after one wash/tumble dry was −5% in length. In separate laboratory testing, line-dried samples shrank less (median −2.2% for 335 samples) than tumble-dried (median −2.8% for 113 samples). Wash inside a mesh laundry bag to limit abrasion on repairs.

Fleece sweater knit, after one wash + tumble dry

after washoriginal
Length
−5%
Width
+2%
Fabric area
−3.1%
Dashed line: fabric before washing. Shaded: after washing. Change drawn at 3× scale so it is easy to see.

When to seek a professional sweater repair

Consider professional repair for expensive sweaters, intricate knits (like cables or lace), or large holes (more than 1 inch wide). Professional reknitting, known as invisible mending, best restores appearance. But for mainstream cotton and fleece knits, a careful home repair using the right method and materials will last through washing and normal wear.

How to fix a hole in a sweater: quick answers

What kind of thread is best for sweater repairs?

Polyester thread for cotton and blends, and wool yarn for wool sweaters provide strength and a repair that wears like the original fabric.

Can you fix very large holes with darning?

Darning is best for holes up to 1 inch. For anything bigger, add a patch from similar knit fabric and sew it with a strong stitch.

Does washing damage sweater repairs?

A well-done repair with strong thread generally survives many gentle washes. Tumble drying or rough washing increases the risk of failure.

Should the repair look invisible?

A close color match and even stitching can make repairs nearly invisible, but even a neat visible repair will last and keep the sweater wearable.

Can you use fabric glue instead of sewing?

Fabric glue doesn’t stretch with the knit and rarely holds up in wash or wear; stitching is the best method for durability.

Will repairing a hole prevent it from growing?

Yes, reinforcing and covering the weak area prevents holes from getting larger during everyday use and laundering.

How this guide was researched

This guide was developed based on detailed production and lab reports for fleece sweater fabrics: 1,919 production lots and 23 burst-strength lab reports (Jan–Sep 2026), measuring real-world repair durability and shrinkage after washing. For more on our process, see how we test.

For more on sweater and knitwear fabrics, explore what is modal fabric and all fabric guide articles.

Kamrul Islam

Kamrul Islam

Textile engineer — Head of Dyeing & Development

Kamrul Islam is a textile engineer who has worked in industrial fabric dyeing and development since 2012. He studied wet processing (dyeing) at the University of Chittagong, ran dyeing production, and has headed dyeing and fabric development since 2017 — recipes, shade approval and functional finishes. He writes here so shoppers can understand fabrics the way the people who make…

Ask a question about this fabric

Your email address will not be published. Required fields are marked *

More on Pilling, Holes & Durability

All guides in this topic